What is the Color Code for a 220 Ohm Resistor?
On this page, you'll find the exact color bands for 220 ohm resistors in 4-band, 5-band, and 6-band configurations. Use this information for your electronics projects or as a quick reference when identifying resistors.
4-Band 220 Ohm Resistor Color Code
For a standard 4-band 220 ohm resistor, the color bands are as follows:
- 1st Band (Significant Figure): Red
- 2nd Band (Significant Figure): Red
- 3rd Band (Multiplier): Brown
- 4th Band (Tolerance): Typically Gold (±5%) or Silver (±10%)
Therefore, a 4-band 220 ohm resistor is usually identified by the colors: Red, Red, Brown, Gold or Red, Red, Brown, Silver.
The sequence of the bands should be read from left to right, starting with the band closest to one of the leads.
4-Band 220 Ohm Resistor
Value: 220 Ω ±5%
Red, Red, Brown, Gold
5-Band 220 Ohm Resistor Color Code
For a more precise 5-band 220 ohm resistor, the color bands are:
- 1st Band (Significant Figure): Red
- 2nd Band (Significant Figure): Red
- 3rd Band (Significant Figure): Black
- 4th Band (Multiplier): Brown
- 5th Band (Tolerance): Typically Brown (±1%), Red (±2%), or Green (±0.5%)
Thus, a 5-band 220 ohm resistor is typically: Red, Red, Black, Brown, Brown (±1%), Red, Red, Black, Brown, Red (±2%), or Red, Red, Black, Brown, Green (±0.5%).
5-band resistors offer higher accuracy due to the additional significant figure band.
5-Band 220 Ohm Resistor
Value: 220 Ω ±1%
Red, Red, Black, Brown, Brown
6-Band 220 Ohm Resistor Color Code
A 6-band 220 ohm resistor builds upon the 5-band configuration by adding a temperature coefficient band:
- 1st Band (Significant Figure): Red
- 2nd Band (Significant Figure): Red
- 3rd Band (Significant Figure): Black
- 4th Band (Multiplier): Brown
- 5th Band (Tolerance): Typically Brown (±1%), Red (±2%), or Green (±0.5%)
- 6th Band (Temperature Coefficient): Varies depending on the resistor type (e.g., Red: 50 ppm/K)
Therefore, a common 6-band 220 ohm resistor might be: Red, Red, Black, Brown, Brown, Red.
The sixth band indicates the temperature coefficient, which specifies how much the resistor's value changes with temperature.
6-Band 220 Ohm Resistor
Value: 220 Ω ±1%, 50ppm/K
Red, Red, Black, Brown, Brown, Red
Quick Lookup: 220 Ohm Resistor Color Codes
| Number of Bands | Color Code | Typical Tolerance | Value |
|---|---|---|---|
| 4-Band | Red, Red, Brown, Gold | ±5% | 220 Ω |
| 4-Band | Red, Red, Brown, Silver | ±10% | 220 Ω |
| 5-Band | Red, Red, Black, Brown, Brown | ±1% | 220 Ω |
| 6-Band | Red, Red, Black, Brown, Brown, Red | ±1%, 50ppm/K | 220 Ω |
Need to Decode Other Resistor Values?
Use our free online Resistor Color Code Calculator to find the color codes for any resistor value or to calculate the value from the color bands.
Resistor Color Code Chart
Refer to our comprehensive Resistor Color Code Chart for a complete list of colors and their corresponding values, multipliers, tolerances, and temperature coefficients.
What is a 220 Ohm Resistor?
A 220 ohm resistor is a resistor with an electrical resistance of 220 ohms. It is a commonly used value in electronics for tasks like current limiting in LED circuits and as part of voltage dividers.
Common applications for 220 ohm resistors include:
- Current limiting for LEDs, especially red and infrared LEDs
- Pull-up and pull-down resistors in digital circuits
- Voltage dividers in sensor circuits
- Audio circuits for impedance matching
- Protection circuits for sensitive components